Nothing hurts like when your electricity unit finishes unexpectedly, especially while doing something important. To avoid this, you can always keep an eye on your prepaid meter, by checking your prepaid meter balance, to know when to recharge, without allowing it to finish completely before recharging.
You can always go to your prepaid meter and check your prepaid meter balance, to know how many units are remaining. Once you see your prepaid meter balance, you will be able to know if it’s time to recharge again or not.
Also, sometimes, your light may go off, then you won’t know whether your house is having an electricity fault or your prepaid unit has finished. In this, by checking your prepaid meter balance, you would be able to tell why your light went off.
Code to Check Prepaid Meter Balance
The code to check prepaid meter balance is 009#. You just have to dial the code on your prepaid meter, then press Enter, and you will see your balance.
How to Check Prepaid Balance
Checking the prepaid meter balance is done mostly on the prepaid meter. To do this, you would need to:
- Plug in your prepaid meter on a power source. Make sure it powers On.
- On the prepaid meter, dial 009#.
- Press Enter key.
Conclusion
As at the time of writing this post, you may not be able to check your prepaid meter balance through your smartphone. To check the prepaid meter balance, you have to do that through the prepaid meter, by just dialing 009# and then press Enter.
